● General Description:
ALTEK's Small Form Factor Pluggable (SFP) transceivers are compatible with the dimensions defined by the SFP Multi-Sourcing Agreement (MSA). The ALTEK Cisco compatible small form factor fiber optic transceivers are used in pairs. These transceivers transmit and receive signals on one fiber strand using two wavelengths. These hot pluggable optical transceivers consist of two sections: the transmitter section uses 1490 nm DFB laser/1550 nm Fabry-Perot laser; the receiver section uses an integrated B type/A type detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The transceivers use standard simplex LC connectors for fiber cable connection and provide a long transmission distance of up to 80 km. In addition, the transceivers are compliant with SFP Multi-Source Agreement (MSA) Specification and SFF-8472.
● Quick Details:
► Data rate up to 1.25 Gbps;
► Hot-pluggable SFP footprint;
► GSB-1243L-L4CD: 1550 nm DFB Transmitter and 1650 nm PIN Receiver;
► GSB-1234L-L4CD: 1310 nm FP Transmitter and 1490 nm PIN Receiver;
► Transmission distance up to 80 km;
► Simplex LC connector;
► Low power dissipation;
► Digital diagnostic monitor interface is compliant with SFF-8472;
► Compliant with SFP MSA Specification;
► Compliant with IEEE 802.3z Gigabit Standard;
► RoHS compliance.
● Application:
► WDM Gigabit Ethernet Links;
► Fiber Channel Links;
► SONET/SDH Equipment Interconnect.
● Description:
Maximum Data Rate | 1.25 Gbps |
Compatibility |
Cisco Compatible |
Distance |
80km |
Max Data Rate |
1000Mbps |
Wavelength |
1550nm-TX/1490nm-RX |
Supply Current |
300 mA |
Interface |
LC Duplex |
Power Supply |
3.3 V |
DOM Support |
Yes |
Cable Type |
SMF |
TX Power |
-9.5 ~ - 3dBm |
Receiver Sensitivity |
< -17dBm |
HS Code |
Optical fibre cables-85447000.00 |
● Optical characteristics transceiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
40km | |||||
Centre Wavelength BXD |
λC |
1320 |
1330 |
1340 |
nm |
Centre Wavelength BXU |
λC |
1260 |
1270 |
1280 |
nm |
Spectral Width (RMS) |
σ |
|
|
1 |
nm |
Average Output Power |
P0ut |
-3 |
|
+2 |
dBm |
Extinction Ratio |
EX |
3.5 |
6 |
|
dB |
● Mechanical Specifications:
● Optical characteristics receiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
20km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-14.5 |
|
|
dBm |
Maximum input |
Pmax |
0 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-14 |
dBm |
LOS Assert |
LOSa |
-25 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
40km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-16 |
|
|
dBm |
Maximum input |
Pmax |
0 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-17 |
dBm |
LOS Assert |
LOSa |
-27 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
60km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
|
|
dBm |
Maximum input |
Pmax |
-7 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-23 |
dBm |
LOS Assert |
LOSa |
-33 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
80km | |||||
Centre Wavelength BXD |
λC |
1480 |
1490 |
1500 |
nm |
Centre Wavelength BXU |
λC |
1530 |
1570 |
1580 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
|
-7 |
dBm |
Maximum input |
Pmax |
-7 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-24 |
dBm |
LOS Assert |
LOSa |
-34 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
|
dBm |
Dispersion penalty |
|
|
|
3.0 |
dBm |
● Electrical characteristics:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
Remarks |
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current 20km |
Icc |
|
270 |
350 |
mA |
|
Supply Current 40km |
|
|
300 |
450 |
mA |
|
Supply Current 60km |
|
|
300 |
450 |
mA |
|
Supply Current 80km |
|
|
|
500 |
mA |
|
| ||||||
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current |
Icc |
|
|
300 |
mA |
|
Reference Differential Input |
Zd |
|
100 |
|
mA |
|
Input AC Common Mode Input |
|
0 |
25 |
|
mA |
|
Differential Input Voltage Swing |
VID |
150 |
|
900 |
mA |
|
Total Jitter |
|
|
|
|
|
|
Data Dependant Jitter |
|
|
|
|
|
|
Uncorrelated Jitter |
|
|
|
|
|
|
Eye Mask |
See SFP+ MSA |
X1 |
|
|
|
UI |
Eye Mask |
See SFP+ MSA |
X2 |
|
|
0.35 |
UI |
● About Products:
Every transceiver is individually tested on a full range of Cisco equipment and passed the monitoring of ALTEK's intelligent quality control system.
● OEM & Customs:
Partnering with a variety of world class OEM manufacturers for over 8 years, ALTEK is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, ALTEK has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry.
● Shipment:
ALTEK can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period.